Showing 73–96 of 96 results
The Wolf Tooth ReMote was developed for fast, precise, and smooth dropper post actuation. It is ergonomic, durable, low-profile, and has multiple fitments available to integrate with a variety of brake clamps.
- Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
- High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions.
- Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
- Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
- Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
- UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
- Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
- Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
- Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.
Compatibility
- Compatible with all cable actuated dropper posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
- If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
- Contact Wolf Tooth customer service for other post compatibility questions.
ISPEC-EV | ISPEC-II | |
XTR M9100 | XTR M9020 | |
XT M8100 | XTR M9000 | |
SLX M7100 | XT M8000 | |
Deore M6100 | SLX M7000 | |
Deore M4100 | Deore M6000 | |
Shimano model # can be found on the fluid reservoir |
SRAM Brakes | ||
MatchMaker X | Not Compatible | |
Guide RS | Code R | |
Guide R | Code RSC | |
Level TL | G2 R | |
Level TLM | G2 RS | |
Level Ultimate | G2 RSC | |
Guide RE | ||
G2 Ultimate |
Mounting Types
- ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware
- ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp.
- ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2Nm max.
- ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.
- ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above)
- ReMote IS-EV for Shimano I-SPEC EV - Includes IS-EV hardware
ALL-MOUNTAIN MASHER
Lyrik instills the confidence you know you’ll need when charging techy lines and mach-speed steeps. A homage to everything we love most about riding—the orchestration of navigating unpredictable terrain and the controlled chaos that makes dream lines possible.
Faster. Stronger. Ruthlessly efficient.
The new Lyrik is up for anything and down for it all. The most versatile fork in our lineup features a hyper-focused new chassis that’s lighter while still critically stiff to deliver on Lyrik’s legendary performance and party attitude. Lyrik Ultimate packs an orchestra of industry-leading tech like the new Charger 3 damper, ButterCup technology, and the new DebonAir+ air spring. Let Lyrik sing with a fresh signature colorway we call “Heavy Meadow”, inspired by our favorite alpine sufferfests. The new Lyrik Ultimate is here.Performance to match the most demanding riders out there. The ground up, all-new Super Deluxe Coil Ultimate is a work of art with no feature spared. Equipped with an entirely new chassis, 100% independent High Speed and Low Speed Compression adjustment, increased bushing overlap for improved small bump performance, and optional Adjustable Hydraulic Bottom Out to tailor that bottomless feel. It’s the unmistakable feel of coil, evolved. A coil shock packed full of premium technology that gives you a hand in painting the experience of how you ride.
Please note: This dropper comes with NO Remote
Such Great Heights
Not a single thing in the way of the experience.
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what’s possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS enabled components.
PLEASE NOTE: This Dropper post DOES NOT COME WITH REMOTE
An absolute workhorse. A dropper post and remote combo with unsurpassed durability, reliability and simplicity all in one competitively priced package.
THE BENCHMARK OF GRAVITY AIR SHOCK PERFORMANCE
The most tunable air sprung shock combines an ultra-plush, coil-like feel with incredible damping prowess optimized for Downhill and Enduro racing.
HEAVYWEIGHT FEATURES
IN A LIGHTWEIGHT PACKAGE
Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity.HEAVYWEIGHT FEATURES
IN A LIGHTWEIGHT PACKAGE
Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity.GAME CHANGER
Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to every terrain imaginable.
The Fox High Pressure Shock Pump allows you to accurately fine tune your fork and shock pressure with its clear digital display up to 350 psi.
The main features include
- 0.5psi increments up until 100 psi, 1 psi increments 100 psi and up.
- 0-350 psi range
- Units: psi, bar, kg/cm2
- Automatic power off
- Pressure release button
- Swivel rotating hose
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
Optimized for 160-180mm of travel and packing the same revolutionary feature set as the new 36, the category defining 38 is ready for the big time.ALL 38 FACTORY GRIP2 FORKS | ||||
---|---|---|---|---|
Upper Tube Finish | Kashima Coat | |||
Air Channels | Yes | |||
Bleeders | Yes | |||
Floating Axle | Yes | |||
Rotor Size | 180 direct Post Mount, Up to 230 compatible | |||
Mud Guard Mount | Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment | |||
Air Spring | FLOAT EVOL | |||
Steerer | 1.5 Taper | |||
Starting Weight | 2180 g |
READY TO
ATTACK THE TRACK
Completely redesigned for 2021, this World Cup weapon comes equipped with an updated version of our award-winning GRIP2 damper, an updated EVOL air spring, and a host of other radical new performance-driven features.
READY TO RACE STRAIGHT OUT OF THE GATE
Featuring an entirely new chassis and damper, delivering enhanced tunability, smoother performance, and more progressivity than ever before.SIZES (With 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | |
Metric Sizes (NEW 2021 model) | |
Imperial Sizes (2020 model) | 7.875 x 2.25 |
SIZES (Without 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | |
Metric Sizes (NEW 2021 model) | 250 x 75 |
Imperial Sizes (2020 model) | 8.75 x 2.75 |
ADJUSTMENTS |
---|
Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) |
High-speed compression - 8 clicks |
Low-speed compression - 16 clicks |
High-speed rebound (w/VVC) - 8 clicks |
Low-speed rebound - 16 clicks |
Coil spring preload - (new detents on spring collar) |
ALL FACTORY DHX2 SHOCKS | |
---|---|
Shaft Coating | Chromoly - Ultra-low friction, highly durable damper shaft finish |
VVC Rebound | Yes |
Detents on spring collar | Yes |
THE NEW FLOAT X2 CHANGES EVERYTHING
The award-winning, gravity-defying air shock is totally redesigned for 2021. Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house.SIZES (With 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | |
Metric Sizes (NEW 2021 model) | |
Imperial Sizes (2020 model) | 7.875 x 2.25 |
SIZES (Without 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | |
Metric Sizes (NEW 2021 model) | 250 x 75 |
Imperial Sizes (2020 model) | 8.75 x 2.75 |
ADJUSTMENTS |
---|
Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) |
High-speed compression - 8 clicks |
Low-speed compression - 16 clicks |
High-speed rebound (w/VVC) - 8 clicks |
Low-speed rebound - 16 clicks |
ALL FACTORY FLOAT X2 SHOCKS | |
---|---|
Body finish | Kashima Coat |
VVC Rebound | Yes |
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
SHIMANO – Seat post Dropper Lever – I-SPEC EV
With ideal ergonomics and smooth lever action, SHIMANO’s SL-MT800-IL seat post dropper lever provides quick lever access with minimal hand movement. The new I-SPEC EV lever offers a wide range of adjustments and 7mm of cable stroke. With a lightweight and compact design, the SL-MT800-IL lever sets the standard for mountain bike dropper remotes.
- Fast & effortless operation
- Quick lever access from grip position with minimum hand movement
- Light operation effort
- Compatible with common dropper posts
- 7 mm cable stroke
- I-SPEC EV type only
Run over everything.
Presenting the Smashpot - a fork coil spring conversion system for singlecrown enduro forks, featuring externally adjustable hydraulic anti-bottoming technology to deliver precisely the amount of bottoming resistance you need. CLICK HERE FOR SPRING RATE CHART CLICK HERE FOR INSTALLATION INSTRUCTIONS (pdf, 8.2Mb)Features:
- Compatible with Fox 36 (2015+) and 36 Rhythm, and Rockshox Pike/Lyrik/Yari/Revelation (35mm) forks. See bottom of page for fitment notes.
- 130-180mm travel, internally adjustable using included spacers. (Note - max permissible travel for your fork is determined by the fork manufacturer and may be less than 180mm)
- Full tool-free control over bottoming resistance.
- 11 coil spring rates available, from 30lbs/in to 80lbs/in precision wound in 5lbs/in increments.
- Rider weights from 45kg (100lbs) to 125kg (275lbs) catered for.
- Universal cartridge kits require only new top caps to be moved between different forks (and foot studs if different fork brands).
- Springs are guided and isolated internally and externally to reduce spring buckling and knocking, minimising noise.
- Spring guiding system also means less rubbing, less wear and less contamination of the bath oil.
- Utilises more oil for superior bushing lubrication and smoothness.
- Only coil conversion system on the market allowing 180mm travel.
- Easy and cost-effective to transfer from one fork to another.
- Allows full use of travel even for very light riders
- No harsh bottoming.
- Reliable and low maintenance.
- User installable and serviceable.
- Designed, developed and manufactured in Whistler, Canada.
- Weight increase of approximately 250-450g (dependent on spring rate and fork's existing spring system).
- System includes one universal Smashpot cartridge kit with brand-specific food stud, fork-specific topcap and spring.
- $420.69CAD (approx $315USD)
Why Coil?
Air springs have improved substantially over the years - and we've been at the forefront of air spring development for years, so we've got no bridges to sell you. Yeah, coils are heavier than air, and for some riders that alone is a dealbreaker - fair enough. The advantages of coil springs, however, are clear:- Zero stiction or friction in a coil spring. And there never will be.
- Zero spring rate variation.
- Zero moving seals in the spring system to wear out, cause friction or leak.
- Zero temperature effect on spring rate.
- Zero altitude sensitivity.
- More oil in the fork - lubrication and service life are improved.
- Day in, day out, the fork just straight up feels good.
- In short, improvements in sensitivity, grip, compliance, mid-stroke support and consistency, with reductions in harshness and hand pain.
Externally adjustable, speed sensitive hydraulic bottoming control valve
The heart of the Smashpot is a speed sensitive shimmed valve which engages progressively and seamlessly in the last 50mm of travel to effectively manage high energy and low energy inputs without harshness. Easy tool-free external adjustment ensures you get as much or as little bottoming resistance as you need. Light and smooth? Easy. Big and aggressive? Just as easy. Turn a dial and you're sorted.Why go this route?
Unlike conventional hydraulic anti-bottoming cones, the longer displacement over which it is effective and its speed-sensitive shimmed valve means the Smashpot can dissipate more energy with lower forces, bringing the fork to a gentle stop at the end of the travel in a smooth, controlled manner. Compared to alternatives such as elastomer or pneumatic bump stops, the Smashpot doesn't involve components physically colliding mid-travel. And unlike air springs and pneumatic bump stops, it dissipates energy rather than storing it and throwing it back at you, further stabilising the bike. There's no air spring seals, meaning fewer potential points of failure in your fork, no spring stiction, fewer wearing seals, and no need for a shock pump - ever.FAQ
- How much weight does it add? It's heavier than your air spring by between 250-450g, depending on spring rate (firmer springs are generally heavier) and the fork's original spring system (TALAS/DPA are typically heavier than Float/Solo Air). If the weight bothers you, you may be more interested in a Luftkappe.
- Can I convert my fork back to air afterwards? Going back to air, should you wish to, may not be an option - spring rub may score the inside of your stanchion, so the the piston may not seal again. The spring is both isolated and guided to minimise stanchion knock and rub, however there are no guarantees an air spring will seal again after riding with a spring installed. We'd be pretty surprised if anyone actually wanted to do this after riding the Smashpot though.
- Do I need any extra parts to change the travel? All spacers required are included with the kit. The only thing you may want is more heat shrink for the cartridge tube, as it's installed after travel is set internally. CLICK HERE FOR SPARE PARTS.
- Does it void the fork's warranty? As with any aftermarket modifications, it should be expected to void the fork manufacturer's warranty.
- What versions of the Pike does it fit? It is available for all 35mm Pikes in 27.5" and 29" from MY2014 onwards (no fitment for 26") in Boost and non-Boost. 29" forks need to use the included adaptor to lengthen the top cap.
- What versions of the Revelation does it fit? It fits all 35mm versions of the Revelation from MY2018 onwards.
- What versions of the Lyrik/Yari does it fit? It fits all versions of the Lyrik & Yari from MY2016 onwards.
- What versions of the Fox 36 does it fit? It fits all versions of the 36 from MY2015 onwards EXCEPT Pedelec e-bike specific forks. IMPORTANT: Call Fox with your serial number to check your fork's maximum permissible travel if attempting to run your fork with the Smashpot over 160mm if this is more travel than it currently has.
- Will it fit any other forks? Other applications are under development. Got a fork you want to see it made for? Contact us and let us know.