Showing all 5 results
$158.00
Add to cart
A NEW HOPE
It's a sad fact of life: your moving components on your bike will have to be replaced in order to keep your bike working properly. Some components will wear out after 1000 miles, and some will last much longer. The Hope Pro 4 Shimano Micro Spline Freehub Body is designed to replace the freehub body on your Hope Pro 4 hubs. It is only compatible with Shimano Micro Spline cassettes.FEATURES
- Replaces your freehub body on your Hope Pro 4 hubs
- Compatible with Shimano Micro Spline cassettes
- Available for 12mm thru-axles
$120.00
Add to cart
Hydra 6 bolt front and rear replacement bearings. Not compatible with single speed hubs. For SS, use TKMB01 or TKMB03.
Compatible With
Hydra 6 bolt front and rear hub shells
Includes
- 3 - 61804A5 steel bearings
- 1 - 15307A5 steel bearing
- 1 - 15267A5 steel bearing
- 1 - 152610A3 steel bearing
$1,790.00 – $3,790.00
Select options
Chris King ISO hubset
Chris King ISO hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
DT Swiss EX511 rim
Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB was all about since the beginning. The EX 511 rim is the perfect tool for this quest: It comes with all the technology that has delivered many EWS wins and packs it in a 30 mm wide profile. Ready to go burlier, faster.
DT Swiss XM481 rim
Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30 mm of inner width together with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain.
We Are One Composites
Not all Carbon rims are created equally. Here at We Are One we are the first manufacturer to bring transparency to the process and products. Our unmatched quality and precision tolerances allow us to make the best carbon rims on the market. Period!
Our unique layup process, developed here in-house, allows for precise fiber placement, giving no fiber drift or bridging during layup. This process ensures that all our fiber strands are under correct elongation and are carrying the loads they should. All of our rims are perfect out of the mold. We do not sand, fill, paint, or doctor any of our products.
Each rim is assigned a unique serial number that is tracked and assembled by one of our layup staff. Our team takes great care and pride and only produce the best rim possible.
ZIPP 3ZERO MOTO rim
Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed:
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
$1,150.00 – $2,990.00
Select options
DT Swiss 350 hubset
The DT Swiss 350 Rear hub is an affordable Ratchet System hub, which guarantees top-end performance all the way down the mountain. The forged aluminium hub shell keeps weight to a minimum, is substantially tougher and more durable than most other hubs on the market and is intended primarily for trail, gravity and Enduro riding.
DT Swiss EX511 rim
Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB was all about since the beginning. The EX 511 rim is the perfect tool for this quest: It comes with all the technology that has delivered many EWS wins and packs it in a 30 mm wide profile. Ready to go burlier, faster.
DT Swiss XM481 rim
Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30 mm of inner width together with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain.
ZIPP 3ZERO MOTO rim
Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed:
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
$1,600.00
Add to cart
The trails in our neck of the woods get pretty hairy pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations.
- Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat.
- Rim Material: Carbon fiber
- Rim Width: 30mm internal
- Front Spoke Pattern: Two-cross
- Rear Spoke Pattern: Two-cross
- Spoke Count: 28h Front, 28h Rear
- Spoke Type: DT Swiss Competition Race J-bend
- Nipple Type: DT Swiss Brass Pro Lock hexagonal
- Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps.
- Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub.
- Includes 31mm OD end caps for front hub
- Bearing Type: Sealed cartridge
- Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier.
- Assembly Method: Hand-built
- Total Wheelset Weight: 1800g