Showing all 10 results
$36.00
Add to cart
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
$28.00
Add to cart
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
$99.00
Select options
The Burgtec composite pedal is everything you’d expect from a Burgtec pedal but at a more affordable price point.
Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price.
The best of both worlds can exist.
$169.00
Select options
The Penthouse Flat Mk4 is more than a pedal it's a religion.
The Mk4 pedal keeps the best features of the Mk3 such as oversized platform, incredible grip and easy to remove pins.
We then put it on a diet and slimmed down the weight and the profile of the body.
We also increased the reliability of the internals of the pedal by using a double bush single bearing arrangement. Producing longer intervals between servicing.
Singletrack Magazine long term test - Burgtec Penthouse Mk4s are seemingly pedals that do not die, they just become more storied
Specification
- Weight: Steel axle 440g
- 16mm profile
- 1mm dish
- Easy to remove pins
- Steel pins
- New double bush single bearing internals.
$249.00
Select options
The Penthouse Flat Mk4 is more than a pedal it's a religion.
The Mk4 pedal keeps the best features of the Mk3 such as oversized platform, incredible grip and easy to remove pins.
We then put it on a diet and slimmed down the weight and the profile of the body.
We also increased the reliability of the internals of the pedal by using a double bush single bearing arrangement. Producing longer intervals between servicing.
Singletrack Magazine long term test - Burgtec Penthouse Mk4s are seemingly pedals that do not die, they just become more storied
Specification
- Weight: Titanium axle 370g
- 16mm profile
- 1mm dish
- Easy to remove pins
- Steel pins
- New double bush single bearing internals.
$199.00
Select options
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
$197.00 – $247.00
Maintenance and Rebuild Procedure
Select options
VITAL-MTB 4.5/5 Star Review - Read the full review here
“With a thin and wide design that provides plenty of grip and stability, the OneUp aluminum pedals offers great performance in a durable and easy to maintain package”
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs.
Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.
When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.
FEATURES
- 10 rear loading custom hexagonal removable pins per side for maximum grip
- Ultra thin leading edge chamfered design to deflect off any obstacle
- Fully sealed and serviceable design with built in bearing extractor
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
Weight: 365g
Platform Size: 115x105mm
# of Pins: 10 per side
Axle Material: Chromoly steel
Height: 8.3-12mm
Pin to Axle distance: 112mm
Color: Black, Green, Grey, Red, Orange, Blue
Body Material: 6061-T6 Aluminum
INSTRUCTIONS
Ensure flange pedal washer and lip seal are assembled with flange side towards crank. In the following orientation. We recommend an additional standard pedal washer to be used with counter bored cranks in between our pedal and the crank. Install with 8mm Hex. Torque to 35Nm (25 ft-lbs) Min NOTE:- Uninstalled pedals have a minimal axial movement built in that is eliminated when fully install on cranks.
- The retaining O-ring is only to keep the flange washer and seal on pedal in the box and for assembly. It is not necessary for the function of the pedal and can be removed.
- Out of the box our pedals have some resistance to free spinning by design. This can be adjusted by adding or removing grease upon disassembly. Free spinning will increase over time and wear of the bushing.
Maintenance and Rebuild Procedure 
$77.00
Select options
MTBR 5 Star Review - Read the full review here
"The pedals performed flawlessly and just seemed to get better with time as they spun more freely and the edges were smoothed out. The best thing about them is the grip. Heel down, heel up or pedaling out of saddle, the pedals always provided reliable and predictable grip."
"Are they better than the venerable Race Face Chester pedals at $55? Yes! They weigh exactly the same at 360 grams but the OneUps deliver much more grip.
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.
FEATURES
- 40 rear loading threaded pins with nyloc nuts
- DU plus cartridge bearing axle system
- Thin leading edge chamfered design to deflect off obstacles
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
Weight: 355g
Platform Size: 115x105mm
# of Pins: 10 per side
Axle Material: Black chromoly steel
Height: 18.5mm (13.3 at the leading edge)
Pin to Axle distance: 108mm
Color: Stealth Black
Body Material: Nylon Composite
INSTRUCTIONS
Install with 6mm Hex or 15mm pedal wrench. Torque to 35Nm (25 ft-lbs) Min
$153.00
Read more
The Shimano XT Trail pedals are built for Enduro and Trail riders wanting to get the best out of their bike. With a wider and longer platform they offer improved control, making it easier to navigate obstacles on the trail. The integrated cage helps protect the binding system from impacts on rocks or roots and makes stepping in to Shimanos crisp SPD system even easier. The more durable axle provides increased longevity against rock strikes.
$217.00
Add to cart
Shimano XTR is well known for its quality and the Shimano XTR Trail PD-M9120 SPD Pedals are XTR through and through. Aimed directly at All Mountain and Enduro riders these pedals will tick most boxes for riders who are after a top quality pedal with a wide and long contact area that provides a more solid pedal to shoe interface which transmits power efficiently. Whilst these are best paired with Shimano's range of ME and AM shoes they are just at home in a wide range of MTB SPD shoes.
The binding platform is protected with a durable and lightweight integrated cage that surrounds the binding and makes it easier for stepping into as it acts like a guide.
The new axle design is more durable than ever before and weighing in at 405g a pair these will offer you better bike control whilst giving you the durability and logivity that an XTR product will provide.
Specs:
- MODELPD-M9120 - XTR M9100 Series
- Colour - Black
- Weight -405g a pair
- Dual Sided Binding
- SM-SH51 Cleats included
- Reflector SM-PD60
- Sealed mechanism