Product Description
$22.00
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
In stock
Email to a friendDescription
SHIM INSTRUCTIONS:
1. Unscrew the post collar by hand and slide it up towards the seatpost head. Then gently press the remote lever to pop the upper bushing (White part) out of the lower post. Then slide this bushing up towards the seatpost head.
2. Drop your saddle to a mid stroke position at least 75mm below full extension. Install all 3 10mm pin shims by sliding them into the lower tube grooves below the upper bushing.
3. Lower the upper bushing and ensure you can push it fully into the lower tube by hand (if you can’t you may need to drop the seat a bit more). Reinstall the seat collar by hand. Extend the post fully. Your post is now 10mm shorter.
Repeat this process to add another 3 pin shims stacked on top of the first 3 to shorten the post by 20mm.
4. Raise your entire post to a comfortable ride/climbing height and pedal around in your riding shoes/kit to make sure it is correct.
Congratulations, you now have the longest dropper post that will fit on your bike!
Go Ride.
Related Products
THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Send Enquiry for Fork Fox Float 38 Factory Kashima 29″ 170mm Grip2 QR 44mm ’22 [BLACK]
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
Send Enquiry for FORK FOX FACTORY 36 FLOAT GRIP2 29″ 44mm 160 OFFSET KASHIMA / ORANGE ’22
THE NEW FLOAT X2 CHANGES EVERYTHING
The award-winning, gravity-defying air shock is totally redesigned for 2021. Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house.SIZES (With 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | 7.875 x 2.0 / 8.5 x 2.5 |
Metric Sizes (NEW 2021 model) | 210 x 50 / 210 x 55 / 230 x 57.5 / 230 x 60 / 230 x 65 |
Imperial Sizes (2020 model) | 7.875 x 2.25 |
SIZES (Without 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | 9.5 x 3.0 / 10.5 x 3.5 |
Metric Sizes (NEW 2021 model) | 250 x 75 |
Imperial Sizes (2020 model) | 8.75 x 2.75 |
ADJUSTMENTS |
---|
Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) |
High-speed compression - 8 clicks |
Low-speed compression - 16 clicks |
High-speed rebound (w/VVC) - 8 clicks |
Low-speed rebound - 16 clicks |
ALL FACTORY FLOAT X2 SHOCKS | |
---|---|
Body finish | Kashima Coat |
VVC Rebound | Yes |
Send Enquiry for Fox Racing Shox – FLOAT X2 – 2021
Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required.
Fox Racing Fork Dust Wiper/Foam ring Kit – Latest version, Low Friction, 36mm with NO flange. Part number 803-00-933
Suitable for all Fox 36 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note – These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers (Including 1 for Talas cartridges)
Send Enquiry for Dust Wiper Kit Fox 36 No Flange
THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Send Enquiry for Fork Fox 38 Factory Grip2 KABOLT 29″ 44mm 170mm Shiny Orange ’22
READY TO
ATTACK THE TRACK
Completely redesigned for 2021, this World Cup weapon comes equipped with an updated version of our award-winning GRIP2 damper, an updated EVOL air spring, and a host of other radical new performance-driven features.
Send Enquiry for Fork Fox 40 Factory Float 29″ Grip2 Black ST 52mm
Built to match the new generation of long-travel, hard-hitting mountain machines. ZEB’s bold design is built to withstand the gnarliest enduro tracks, death grip speeds, relentless rock gardens, raw corners, steep chutes, and one heck of a good time. From Rampage glory to Enduro World Series titles, there isn’t much ZEB has left to prove.
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
Send Enquiry for DVO Suspension Diamond Dust Wiper Seal Kit 35mm
Built to match the new generation of long-travel, hard-hitting mountain machines. ZEB’s bold design is built to withstand the gnarliest enduro tracks, death grip speeds, relentless rock gardens, raw corners, steep chutes, and one heck of a good time. From Rampage glory to Enduro World Series titles, there isn’t much ZEB has left to prove.
Send Enquiry for FORK ROCKSHOX ZEB ULTIMATE RC2 GLOSS BLACK | 29″ | 170mm | Charger 3 | 15x110mm | 44mm Offset
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
• Fox Float CTD/DPS Air Spring Volume Tuning Kit • Fox Par Number: 803-01-250
Send Enquiry for Rear Shock FOX Volume Spacer Tuning Kit FLOAT CTD/DPS 9MM
ALL-MOUNTAIN MASHER
Lyrik instills the confidence you know you’ll need when charging techy lines and mach-speed steeps. A homage to everything we love most about riding—the orchestration of navigating unpredictable terrain and the controlled chaos that makes dream lines possible.
Send Enquiry for Fork Rockshox Lyrik Ultimate RC2 Gloss Black | 29″ | 160mm | Charger 2.1 | BOOST 15x110mm | 42mm Offset
READY TO RACE STRAIGHT OUT OF THE GATE
Featuring an entirely new chassis and damper, delivering enhanced tunability, smoother performance, and more progressivity than ever before.SIZES (With 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | 7.875 x 2.0 / 8.5 x 2.5 |
Metric Sizes (NEW 2021 model) | Tr 205 x 60 / 210 x 50 / 210 x 55 / 230 x 57.5 / 230 x 60 / 230 x 65 |
Imperial Sizes (2020 model) | 7.875 x 2.25 |
SIZES (Without 2-position Adjust Lever) | |
---|---|
Imperial Sizes (NEW 2021 model) | 9.5 x 3.0 / 10.5 x 3.5 |
Metric Sizes (NEW 2021 model) | 250 x 75 |
Imperial Sizes (2020 model) | 8.75 x 2.75 |
ADJUSTMENTS |
---|
Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) |
High-speed compression - 8 clicks |
Low-speed compression - 16 clicks |
High-speed rebound (w/VVC) - 8 clicks |
Low-speed rebound - 16 clicks |
Coil spring preload - (new detents on spring collar) |
ALL FACTORY DHX2 SHOCKS | |
---|---|
Shaft Coating | Chromoly - Ultra-low friction, highly durable damper shaft finish |
VVC Rebound | Yes |
Detents on spring collar | Yes |