THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Only 2 left in stock
Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork.
EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression.
The benefits of EVOL are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.
The new Kabolt-X, a lightweight bolt-on floating axle exclusively for the all-new 36 and 38 that not only shaves grams but also increases torsional stiffness via its sleeveless, single-sided pinch bolt design. Chassis alignment must be reset each time the front wheel is removed and reinstalled on both the Kabolt-X and 40 floating axles, but the end result is the same – perfect alignment and perfect performance.
LOWER LEG BYPASS CHANNELS
As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping.
Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.
Our lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness.
LOWER LEG ARCH
Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Our all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding.
Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Our new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
(ON SELECT MODELS)
The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not.
The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots and the sketchiest of landings. The prototype proved to be World Championship material and the final product is now available for you to shred as hard as you want. Available as a classic 26″, a 27.5″ and as a 29″ wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed
MATERIAL – ALUMINIUM
INNER WIDTH – 30 mm
OUTER WIDTH – 35 mm
DECAL TYPE – Vinyl
BRAKE INTERFACE – Disc
NUMBER OF HOLES – 32
BORE TYPE – Eyelet
RECOMMENDED SYSTEM WEIGHT MAX. – 140 kg
ASTM CLASSIFICATION – 5
Shimano’s XT/Saint RT86 Ice-Tech 6-Bolt Disc Brake Rotor provides exceptional stopping performance in all weather conditions. Featuring a triple-decker construction of stainless steel and alloy 3-layer to speedily disperse the heat generated from your ride, this mountain bike disc brake rotor has an outstanding lifespan and produces less noise than your average, run-of-the-mill disc rotor.
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
THE HARD CHARGING DO IT ALL TRAIL FORK
Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own.
- 160Wh capacity delivers up to one additional hour of riding.
- Compatible with Turbo SL Bikes.
- Includes a 3 LED charge-level indicator.
- SL Range Extender cable sold separately
Specialized Range Extender Cable 160mm (MTB) – For Levo and Levo Sl
Specialized Range Extender Cable 285mm (MTB) – For Kenevo Sl
- 60 Grams
- Standard Grip Length – 5 1/8″
- Weight plus or minus 5%
- 1 Set of Bar Plugs Included
Lyrik instills the confidence you know you’ll need when charging techy lines and mach-speed steeps. A homage to everything we love most about riding—the orchestration of navigating unpredictable terrain and the controlled chaos that makes dream lines possible.
SHIMANO DEORE – 12-speed – HG – MTB Chain
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
- Proprietary design ensures smooth shifting and strength
- Extended inner plate improves chain engagement and retention
- Shorter shift times and less pedaling shock
- Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
In Mountain bike riding, trail conditions change drastically from one second to the next, from one turn to the next. Mountain bikers need to be able to seamlessly Perceive the conditions, Judge their options, and Operate their bike in a split second. XTR satisfies the needs of the most demanding riders by providing the highest level of precision and integration. We refocused on the original goal of XTR – to be the ultimate race components.
Greater flexibility and action-optimized cockpit layout to focus riding by I-SPEC EV
Quicker lever access and light operation force by new shifting system for rider’s concentration
Definitive HYPERGLIDE+ shifting let you pedal continuously while shifting
High-performance and optimal disc brake system for XC and Enduro racing
– Aluminium trigger designed for a positive lever feel.
– Includes bar clamp
– MatchMaker™X compatible.
– Master GX Eagle™ master colorway to match all cassette and chain colors as part of Eagle™ Colorsystem.
- Backwards compatible, works with both 10-50t and new 10-52t cassettes.
- Updated cage architecture provides better chain retention and precise shifts.
- Comes in GX Eagle™ master colorway as part of Eagle™ Colorsystem and goes with all colors of Eagle cassettes & chains – from Black to Gold to Rainbow, to HardChrome and new Copper.
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths – 35mm, 42.5mm and 50mm
- Available in both 31.8mm and 35mm Clamp
- Weight; 35mm 138g, 42.5mm 152g , 50mm 160g
- 9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie Pink