$29.00
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
In stock
Email to a friendDescription
Follow the instructions below referencing this exploded view
Related Products
Send Enquiry for Vorsprung Secus Fox A1 Fork Air Spring Upgrade Kit
THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Send Enquiry for Fork Fox 38 Factory Grip2 KABOLT 29″ 44mm 170mm Shiny Orange ’22
Performance to match the most demanding riders out there. The ground up, all-new Super Deluxe Coil Ultimate is a work of art with no feature spared. Equipped with an entirely new chassis, 100% independent High Speed and Low Speed Compression adjustment, increased bushing overlap for improved small bump performance, and optional Adjustable Hydraulic Bottom Out to tailor that bottomless feel. It’s the unmistakable feel of coil, evolved. A coil shock packed full of premium technology that gives you a hand in painting the experience of how you ride.
Send Enquiry for ROCKSHOX SUPER DELUXE COIL ULTIMATE 230×60 LNL HB 320 RC2T LinReb/LowComp, (NO SPRING)
READY TO
ATTACK THE TRACK
Completely redesigned for 2021, this World Cup weapon comes equipped with an updated version of our award-winning GRIP2 damper, an updated EVOL air spring, and a host of other radical new performance-driven features.
Send Enquiry for Fork Fox 40 Factory Float 29″ Grip2 Black ST 52mm
Fox Racing Fork Dust Wiper/Foam ring Kit – Latest version, Low Friction, 36mm with NO flange. Part number 803-00-933
Suitable for all Fox 36 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note – These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers (Including 1 for Talas cartridges)
Send Enquiry for Dust Wiper Kit Fox 36 No Flange
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
Send Enquiry for FORK FOX FACTORY 36 FLOAT GRIP2 29″ 44mm 160 OFFSET KASHIMA / ORANGE ’22
Saddle Up
Send Enquiry for Dropper Post RACEFACE Turbine R 31.6x200mm ’21
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
Send Enquiry for Fox Racing Shox – Transfer Dropper Seatpost Lever 2021
Built to match the new generation of long-travel, hard-hitting mountain machines. ZEB’s bold design is built to withstand the gnarliest enduro tracks, death grip speeds, relentless rock gardens, raw corners, steep chutes, and one heck of a good time. From Rampage glory to Enduro World Series titles, there isn’t much ZEB has left to prove.
Send Enquiry for FORK ROCKSHOX ZEB ULTIMATE RC2 GLOSS BLACK | 29″ | 170mm | Charger 3 | 15x110mm | 44mm Offset
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
Optimized for 160-180mm of travel and packing the same revolutionary feature set as the new 36, the category defining 38 is ready for the big time.ALL 38 FACTORY GRIP2 FORKS | ||||
---|---|---|---|---|
Upper Tube Finish | Kashima Coat | |||
Air Channels | Yes | |||
Bleeders | Yes | |||
Floating Axle | Yes | |||
Rotor Size | 180 direct Post Mount, Up to 230 compatible | |||
Mud Guard Mount | Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment | |||
Air Spring | FLOAT EVOL | |||
Steerer | 1.5 Taper | |||
Starting Weight | 2180 g |
GLOSS ORANGE | GLOSS BLACK | PISTACHIO - Limited Edition | ||
---|---|---|---|---|
Wheel Size | 27.5 / 29 | 27.5 / 29 | 27.5 / 29 | |
Travel | 180 | 160 / 170 / 180* | 170 | |
Rake | 44 | 37 / 44 / 51* | 44 | |
Axle | 15QR x 110 | 15QR x 110 | Kabolt-X 110 |
Send Enquiry for Fork Fox 38 Factory G2 27.5” 44mm offset 180mm Black ‘21
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required.
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings