Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
UNION – ENDURO WHEELSET
The Union is a do-it-all wheel designed to shred anything that’s thrown at it.
We took a three pronged approach to the creation of the Union- create a rim that’s lightweight, has low radial stiffness and has extremely high impact resistance. Combining these three points with our unique layup design, we were able to achieve a truly impressive “quiver killing” rim. The Union’s design makes it the perfect choice to race enduro at high levels, shred the local trails on an afternoon ride or smash a solid day of shuttle laps.
Send Enquiry for Wheelset We Are One Union/Hydra BOOST 29″ / 27″ MULLET Black 6-Bolt Sram XD
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
SM-CRM95
XTR – Chainring – DYNAMIC CHAIN ENGAGEMENT+ – 12-speed
XTR SM-CRM95 race performance chainring delivers smooth and responsive pedaling over bumpy terrain. The SM-CRM95 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention.
Saddle Up
Send Enquiry for Dropper Post RACEFACE Turbine R 31.6x200mm ’21
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar.
It’s the little difference’s that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw.
Send Enquiry for Handlebar Burgtec RideWide Alloy 35mm 800mm 15mm Rise Black
The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots and the sketchiest of landings. The prototype proved to be World Championship material and the final product is now available for you to shred as hard as you want. Available as a classic 26″, a 27.5″ and as a 29″ wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed
MATERIAL – ALUMINIUM
INNER WIDTH – 30 mm
OUTER WIDTH – 35 mm
DECAL TYPE – Vinyl
BRAKE INTERFACE – Disc
NUMBER OF HOLES – 32
BORE TYPE – Eyelet
RECOMMENDED SYSTEM WEIGHT MAX. – 140 kg
ASTM CLASSIFICATION – 5
Send Enquiry for Rim DT Swiss FR560 29” 32H
Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required.
- Backwards compatible, works with both 10-50t and new 10-52t cassettes.
- Updated cage architecture provides better chain retention and precise shifts.
- Comes in GX Eagle™ master colorway as part of Eagle™ Colorsystem and goes with all colors of Eagle cassettes & chains – from Black to Gold to Rainbow, to HardChrome and new Copper.
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Shimano’s XT/Saint RT86 Ice-Tech 6-Bolt Disc Brake Rotor provides exceptional stopping performance in all weather conditions. Featuring a triple-decker construction of stainless steel and alloy 3-layer to speedily disperse the heat generated from your ride, this mountain bike disc brake rotor has an outstanding lifespan and produces less noise than your average, run-of-the-mill disc rotor.
The E-MTB saddle for women
- Made for E-MTB
- Painless biking
- By women – for women
E-mountain bikers have the ability to stay seated throughout steeper and rougher terrain, therefore their saddle demands are slightly different. For this reason Ergon has developed a special men’s saddle for E-MTBs.