Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
The E-MTB saddle for women
- Made for E-MTB
- Painless biking
- By women – for women
E-mountain bikers have the ability to stay seated throughout steeper and rougher terrain, therefore their saddle demands are slightly different. For this reason Ergon has developed a special men’s saddle for E-MTBs.
Send Enquiry for Saddle Ergon SM E-Mountain Sport Women Medium/Large BLACK
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar.
It’s the little difference’s that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw.
Send Enquiry for Handlebar Burgtec RideWide Alloy 35mm 800mm 15mm Rise Black
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
SHIMANO DEORE – 12-speed – HG – MTB Chain
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
- Proprietary design ensures smooth shifting and strength
- Extended inner plate improves chain engagement and retention
- Shorter shift times and less pedaling shock
- Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
FEATURES
– Aluminium trigger designed for a positive lever feel.
– Includes bar clamp
– MatchMaker™X compatible.
– Master GX Eagle™ master colorway to match all cassette and chain colors as part of Eagle™ Colorsystem.
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
Send Enquiry for OneUp Components Pedal Rebuild Kit Aluminium
Send Enquiry for Shimano XTR Trail BL-M9120 Brake Lever Right
In Mountain bike riding, trail conditions change drastically from one second to the next, from one turn to the next. Mountain bikers need to be able to seamlessly Perceive the conditions, Judge their options, and Operate their bike in a split second. XTR satisfies the needs of the most demanding riders by providing the highest level of precision and integration. We refocused on the original goal of XTR – to be the ultimate race components.
Greater flexibility and action-optimized cockpit layout to focus riding by I-SPEC EV
Quicker lever access and light operation force by new shifting system for rider’s concentration
Definitive HYPERGLIDE+ shifting let you pedal continuously while shifting
High-performance and optimal disc brake system for XC and Enduro racing