Product Description
$139.00
CushCore PRO fits tire widths 2.1″ to 2.6″ and inner rim widths 22mm to 35mm.
Includes (1) CushCore tire insert, (1) 44mm CushCore green presta air valve, (2) rim stickers
Be the first to review “CushCore PRO Tyre Insert 27.5 x 2.1 – 2.6″ Single”
Related Products
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes – aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.
- Dual compound or 3C MaxxTerra options
- EXO sidewall protection
- Tubeless Ready (TR)
Category: XC Race, XC, Trail
Recommended use: Loose to wet spring/fall trail conditions
Recommended installation: Front or Rear
- Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability.
- Bead: Foldable
- Butyl wrapped bead = 2Bliss Ready
- Compound: GRIPTON® T9
- 650 x 2.6″, psi 25-40, approximate weight 960g
- 29 x 2.3″, psi 25-50, approximate weight 975g
- 29 x 2.6″, psi 20-40, approximate weight 1050g
A TIRE THAT IS AT ITS BEST BRINGING UP THE REAR WHILE SPRINTING OUT THE START HUT OF YOUR RACE RUN, AS YOU ATTACK THOSE LOOSE OFF CAMBER SECTIONS, HOLD THE LINE ON ROCKY CHUTES AND PINBALLING DOWN ROCK SECTIONS.
WHO RIDES THIS TIRE.
Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain.
WHERE DOES THIS TIRE PERFORM BEST.
Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails.
CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts.
Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms.
Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best.
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
TRAIL | ENDURO | DOWNHILL
Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
- Dual compound, 3C MaxxTerra, or 3C MaxxGrip options
- 60 TPI, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- EXO or EXO+ puncture protection options
- Wide Trail (WT) sizes are optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail, enduro, and downhill conditions
Recommended installation: Front
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns.
Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
Who rides this tire.
Your bike of choice is a Downhill, Enduro or rowdy Trail rig. You eat/sleep loose turns, berms and full-on terrain.
Where does this tire perform best.
Best suited to your front wheel. A broad range of conditions from loose dust to wet loam. Most at home on challenging terrain where high levels of control are required.
HANS DAMPF
29″ x 2.35″ | EVO | Super Trail | TLE | ADDIX Soft
THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes. Perfect all-round characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels.
• Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in extremely muddy terrain.
• Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip.
• Angled studs in the middle of the tread optimise the rolling characteristics.
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton ST EN is lightweight with sturdy tread blocks. The Newton ST DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 982 | 25-50 | Tubeless Complete |
Scorpion™ ENDURO S
Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability and cornering traction.
- Casing: 60 TPI, Dual-Ply.
- Bead: Foldable.
- Butyl wrapped bead = 2Bliss Ready.
- Compound: GRIPTON® T7/T9.
- 650Bx2.3″, psi 25-50, approximate weight 1240g.
- 650Bx2.6″, psi 20-40, approximate weight 1250g.
- 29×2.3″, psi 25-50, approximate weight 1290g.
- 29×2.6″, psi 20-40, approximate weight 1315g.
Reviews
There are no reviews yet.