Product Description
$99.00
HANS DAMPF
HANS DAMPF HAS EVERYTHING TO INCREASE ENDURO FUN. For stunning handling and the highest puncture protection on demanding trails – ascent as well as descent.
29″ x 2.35″ | EVO | Super Trail | TLE | ADDIX Soft
In stock
Description
• Precisely tuned stud positioning for controlled and forgiving riding at the limit.
• The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions.
• Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance.
Additional information
| Brand | Schwalbe |
|---|
Be the first to review “Tyre Schwalbe Hans Dampf ST Soft 29×2.35 Skin”
Related Products
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing...
$69.00
THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes. Perfect all-round characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels.
• Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in extremely muddy terrain.
• Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip.
• Angled studs in the middle of the tread optimise the rolling characteristics.
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
| Size | ETRTO | Tech | Weight (g) | PSI | Type |
| 29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
A top performer in dry conditions
$75.00
- EXO Protection offered in select models
- Fast rolling center ridge - front or rear
- Raised side knobs for better cornering
The Butcher GRID TRAIL 2Bliss Ready T9 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. The high-dampening GRIPTON® T9 compound rebounds slowly to grip and stick to the ground for total traction and control.
- Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability.
- Bead: Foldable
- Butyl wrapped bead = 2Bliss Ready
- Compound: GRIPTON® T9
- 650 x 2.6″, psi 25-40, approximate weight 960g
- 29 x 2.3″, psi 25-50, approximate weight 975g
- 29 x 2.6″, psi 20-40, approximate weight 1050g
The standard by which all tyres are judged.
- Ramped, directional tread design
- Large cornering blocks
- Single-ply, DoubleDown, and DH casings available
- 3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
- Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns. Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
$124.00
TRAIL | ENDURO | DOWNHILL
Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
- Dual compound, 3C MaxxTerra, or 3C MaxxGrip options
- 60 TPI, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- EXO or EXO+ puncture protection options
- Wide Trail (WT) sizes are optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail, enduro, and downhill conditions
Recommended installation: Front
The New GEN3L material has been developed with a clear objective: increasing the level of rim protection and extending the life of the insert itself, without negatively impacting the insert’s weight, which is always a top priority for us.
The new material has an enormous capacity to absorb impact, and thanks to the addition of an internal reinforcement laminate its structural rigidity and resistance to deformation and stretching have been improved to 200%.
With the new Panzer EVO shape, the total volume of the insert has been reduced by 20%, protection in the area with the highest exposure to impact has been increased, and maximum adjustment of the insert to the rim has been achieved without negatively impacting on ease of installation.
These significant modifications entail an increase in the volume of air inside the tyre, allowing greater freedom in terms of tyre deformation.
$89.00
RACING RAY
THE FRONT WHEEL SPECIALIST. The completely new, extra aggressive XC profile paired with the versatile Addix Speedgrip compound makes Racing Ray a XC weapon and an ingenious addition to Racing Ralph.
29″ x 2.25″ Super Race | Speed
Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability and cornering traction.
- Casing: 60 TPI, Dual-Ply.
- Bead: Foldable.
- Butyl wrapped bead = 2Bliss Ready.
- Compound: GRIPTON® T7/T9.
- 650Bx2.3″, psi 25-50, approximate weight 1240g.
- 650Bx2.6″, psi 20-40, approximate weight 1250g.
- 29×2.3″, psi 25-50, approximate weight 1290g.
- 29×2.6″, psi 20-40, approximate weight 1315g.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns.
Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.Who rides this tire.
Your bike of choice is a Downhill, Enduro or rowdy Trail rig. You eat/sleep loose turns, berms and full-on terrain.
Where does this tire perform best.
Best suited to your front wheel. A broad range of conditions from loose dust to wet loam. Most at home on challenging terrain where high levels of control are required.
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Drive focused tread delivers speed and durability with tracking performance. Rear specific
$124.99
Reviews
There are no reviews yet.