Product Description
$99.00
HANS DAMPF
HANS DAMPF HAS EVERYTHING TO INCREASE ENDURO FUN. For stunning handling and the highest puncture protection on demanding trails – ascent as well as descent.
29″ x 2.35″ | EVO | Super Trail | TLE | ADDIX Soft
Out of stock
Email to a friendDescription
• Precisely tuned stud positioning for controlled and forgiving riding at the limit.
• The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions.
• Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance.
Additional information
Brand | Schwalbe |
---|
Be the first to review “Tyre Schwalbe Hans Dampf ST Soft 29×2.35 Skin”
Related Products
A TIRE THAT IS AT ITS BEST BRINGING UP THE REAR WHILE SPRINTING OUT THE START HUT OF YOUR RACE RUN, AS YOU ATTACK THOSE LOOSE OFF CAMBER SECTIONS, HOLD THE LINE ON ROCKY CHUTES AND PINBALLING DOWN ROCK SECTIONS.
WHO RIDES THIS TIRE.
Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain.
WHERE DOES THIS TIRE PERFORM BEST.
Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails.
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability and cornering traction.
- Casing: 60 TPI, Dual-Ply.
- Bead: Foldable.
- Butyl wrapped bead = 2Bliss Ready.
- Compound: GRIPTON® T7/T9.
- 650Bx2.3″, psi 25-50, approximate weight 1240g.
- 650Bx2.6″, psi 20-40, approximate weight 1250g.
- 29×2.3″, psi 25-50, approximate weight 1290g.
- 29×2.6″, psi 20-40, approximate weight 1315g.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns. Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
TRAIL | ENDURO | DOWNHILL
Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
- Dual compound, 3C MaxxTerra, or 3C MaxxGrip options
- 60 TPI, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- EXO or EXO+ puncture protection options
- Wide Trail (WT) sizes are optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail, enduro, and downhill conditions
Recommended installation: Front
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Next generation tubeless tyre design incorporating tubeless specific bead and casings, allowing for easy installation and superior air retention. Utilising an EN casing paired with the R/T rubber compound, the Newton-ST EN is lightweight with sturdy tread blocks.
With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other.
- Single, dual compound, 3C MaxxTerra, 3C MaxxGrip, or Super Tacky options
- EXO, EXO+, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- Wide Trail (WT) sizes optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail conditions
Recommended installation: Rear
Troy Brosnan’s Go-Fast Signature Tyre
Troy wanted a “unicorn” of a tyre – a center tread design that carried speed easily but with edge blocks worthy of world-class cornering speed. Using our Rekon, Minon DHF, and High Roller II tread patterns as a starting point, Troy and our engineering team began development on the Dissector during the 2018 World Cup season.
The center knobs are all heavily ramped to minimize drag, but retain sharp, flat edges along their backs to provide strong braking traction. Small sipes give the knobs additional flexion, increasing their surface area during braking and aiding the transition to the edge blocks when cornering. C-shaped edge blocks alternate between being closer and farther away from the center line of the tyre. This pattern reduces vagueness when transferring from the center tread to the cornering tread. A distinct channel along either side of the center knobs – along with ample spacing between all lugs – helps to clear debris.
- Recommended as a rear tyre
- Ideal for dry, fast tracks and bike parks
- Wide Trail (WT) casing is optimized for 30-35mm inner rim widths
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton ST EN is lightweight with sturdy tread blocks. The Newton ST DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 982 | 25-50 | Tubeless Complete |
- EXO Protection offered in select models
- Fast rolling center ridge - front or rear
- Raised side knobs for better cornering
Drive focused tread delivers speed and durability with tracking performance. Rear specific
RACING RAY
THE FRONT WHEEL SPECIALIST. The completely new, extra aggressive XC profile paired with the versatile Addix Speedgrip compound makes Racing Ray a XC weapon and an ingenious addition to Racing Ralph.
29″ x 2.25″ Super Race | Speed
THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes. Perfect all-round characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels.
• Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in extremely muddy terrain.
• Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip.
• Angled studs in the middle of the tread optimise the rolling characteristics.
Reviews
There are no reviews yet.