Product Description
$99.00
HANS DAMPF
HANS DAMPF HAS EVERYTHING TO INCREASE ENDURO FUN. For stunning handling and the highest puncture protection on demanding trails – ascent as well as descent.
29″ x 2.35″ | EVO | Super Trail | TLE | ADDIX Soft
Out of stock
Email to a friendDescription
• Precisely tuned stud positioning for controlled and forgiving riding at the limit.
• The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions.
• Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance.
Additional information
Brand | Schwalbe |
---|
Be the first to review “Tyre Schwalbe Hans Dampf ST Soft 29×2.35 Skin”
Related Products
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Next generation tubeless tyre design incorporating tubeless specific bead and casings, allowing for easy installation and superior air retention. Utilising an EN casing paired with the R/T rubber compound, the Newton-ST EN is lightweight with sturdy tread blocks.
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
- Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability.
- Bead: Foldable
- Butyl wrapped bead = 2Bliss Ready
- Compound: GRIPTON® T9
- 650 x 2.6″, psi 25-40, approximate weight 960g
- 29 x 2.3″, psi 25-50, approximate weight 975g
- 29 x 2.6″, psi 20-40, approximate weight 1050g
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
Scorpion™ ENDURO S
Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability and cornering traction.
- Casing: 60 TPI, Dual-Ply.
- Bead: Foldable.
- Butyl wrapped bead = 2Bliss Ready.
- Compound: GRIPTON® T7/T9.
- 650Bx2.3″, psi 25-50, approximate weight 1240g.
- 650Bx2.6″, psi 20-40, approximate weight 1250g.
- 29×2.3″, psi 25-50, approximate weight 1290g.
- 29×2.6″, psi 20-40, approximate weight 1315g.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns. Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other.
- Single, dual compound, 3C MaxxTerra, 3C MaxxGrip, or Super Tacky options
- EXO, EXO+, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- Wide Trail (WT) sizes optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail conditions
Recommended installation: Rear
Drive focused tread delivers speed and durability with tracking performance. Rear specific
TRAIL | ENDURO | DOWNHILL
Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
- Dual compound, 3C MaxxTerra, or 3C MaxxGrip options
- 60 TPI, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- EXO or EXO+ puncture protection options
- Wide Trail (WT) sizes are optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Category: Trail, Enduro, Downhill
Recommended use: All trail, enduro, and downhill conditions
Recommended installation: Front
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton ST EN is lightweight with sturdy tread blocks. The Newton ST DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 982 | 25-50 | Tubeless Complete |
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Reviews
There are no reviews yet.