Product Description
$99.00 $49.00
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
In stock
Email to a friendRelated Products
- What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The Stumpjumper EVO S-Works, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
- We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
SOME SAY THE SB140 NEVER MET A DIRT IT DIDN’T LIKE. WE AGREE IN SPADES.
WHAT’S YOUR PLEASURE? DRAG A BAR. MAKE AN EDIT. STAY OUT AFTER DARK. TRY IT. LAND IT. OR JUST STAY AT IT. HAPPY TO PEDAL.
GREEDY FOR MORE. THE MAYOR OF JIBTOWN, PROUDLY WEARING THE RIP CROWN. THE SB140. DOWN TO FUN.
If, in your eyes, the winner is the one who has the most fun, the Yeti Cycles SB140 Lunch Ride is for you. With a bit more front travel than the “normal” SB140, this model is a bit more smashy-smashy. Rolling on 27.5″ wheels, shod with beefy tires (for a 140mm bike) and high level componentry, this is a bike that’ll make you feel like you’re always in that warmed-up-but-not-cooked mode: the max fun zone. With this SB140 Lunch Ride model, Yeti has been as successful at targeting enjoyment as they are at bagging podiums. What a bike!MASTER OF THE GNARNIVERSE. BOLD CLAIM. THE SB165 WAS CREATED TO GET AFTER WHATEVER YOU’RE GETTING AFTER.
THE SLACKEST SLED IN OUR LINEUP. WITH KINEMATICS TUNED FOR A COIL-SHOCK.
AT HOME OUTSIDE THE TAPE AND TRUSTED ON THE LINES WHERE MISTAKES CAN’T HAPPEN. THE SB165 ALREADY HAS YOU COVERED.
FOR A LIMITED TIME WE ARE OFFERING A FRAME AND FORK COMBO
YETI SB150 + FOX 38 Use your old parts or contact us if you'd like to get some new components and complete this build!Send Enquiry for Yeti Cycles SB130 T-Series ’21 | SHIMANO XT | FOX FACTORY | BRICK | MEDIUM
- What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The Stumpjumper EVO S-Works, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
- We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
-
SPECIFICATIONS
- Lightweight Fiberglass shell construction
- 20 high-flow intake and exhaust ports for maximum ventilation
- Added eps and new headform shape for improved impact performance
- Full incremental sizing for greater range of fitment
- Purpose-built internal cavities for audio integration
- Includes TLD drawstring helmet sock
- Exceeds bicycle certifications: ASTM F1952-DH, ASTM F2032-BMX
- 1225 grams
- Not intended for use with motorized vehicles
“RACE BRED” IT’S NOT JUST A SLOGAN PRINTED ON THE SB150 TOP TUBE. WE’VE BEEN PINNING ON NUMBERS AND PINNING THE THROTTLE SINCE 1985.
MULTIPLE BIKES AVAILABLE SELECT SIZE AND COLOUR FROM MENU BELOW Included with this bike is a starter kit. For more information click here.Countless Olympians, World Champs, and 9-to-5 citizen racers have ridden to victory aboard Specialized cross country bikes. Not only ultralight, but also ultra-capable, because you’re faster when you’re in total control. So, whether you’re looking to race your best season or just want a fast bike for all occasions, this is the place to start.
Send Enquiry for Frame Specialized Epic S-Works Carb/Wht/Spctflr XL ‘21
Status 160 Frameset
- With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance.
- The active, planted feel of the Status’ FSR suspension design and Fox’s DPX2 rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the DPX2 rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.