$58.00
Simple and effective our new entry level shock pump does it’s job every time – perfect pressure setting in an easy to use package. |
|||
MATERIAL |
Alloy barrel, Composite handle and steel gauge housing
|
SIZE
|
One size
|
VALVE TYPE |
Schrader
|
FEATURES |
Easy to use gauge
Easy and accurate operation |
MAXIMUM PRESSURE |
300PSI / 20 bar
|
DIMENSIONS |
235mm
|
WEIGHT |
167g
|
AIR VOLUME PER STROKE |
11CC
|
In stock
Email to a friendBe the first to review “Shock Pump Syncros Alloy SMP-07 Black”
Related Products
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
400psi | 27.5bar
258mm
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
350psi | 24.1bar
220mm
The CushCore Bead Dropper – The Ultimate Tire Lever.
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel.
Features:
- Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use
- Unique “thumb flange” makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims
- Lifetime warranty
POLYLUBE 1000™ LUBRICANT (TUBE)
Park Tool’s polyurea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000™ has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000™ also repels moisture and is compatible with conventional greases.
L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. For hexagonal socket screws and TORX® screws. In a robust and lightweight folding pouch.
Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.
FEATURES
- Utilizes a 12mm guide pin to stabilize the tool in use
- Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter)
- Fits some Shimano® and similar disc brake rotor lockring
EMERGENCY TIRE BOOTS
The fastest, easiest, and most secure way to repair a cut or worn tire sidewall. The TB-2 is produced using a strong, waterproof vinyl membrane with fiber weave reinforcement. A super strong pressure sensitive adhesive assures the boot stays in place in any tubed tire, road or mountain, high or low pressure. A true ride saver.
The TB-2 measures approximately 76mm x 45mm (3″ x 1.75″). Set of three.
Innovative floor pump with an integrated system designed to seat tubeless tires
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.
BBT-5/FR-11 FEATURES
- Fits all Campagnolo® cassette lockrings
- Also fits Campagnolo® Record™, Chorus™, Centaur™, and Athena™ bottom brackets
- The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines
- Always use a skewer or axle nut to hold tool firmly in place during removal and installation
- Center bore for axle or spindle clearance is 16 mm
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.
FEATURES
- Cold forged, heat treated steel handles for strength
- Precision ground cutting jaws for a clean cut on every cable
- Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules
- Wire latch holds handles together when not in use
Send Enquiry for SRAM Brake Bleed Kit with Fluid
Pre-calibrated, torsion beam-style torque wrench. Machined aluminum construction with removable handle and integrated magnet to hold tool bits in place. 2Nm – 10Nm torque capacity. No preset necessary-simply twist until marker lines up with desired torque setting. Includes soft shell carrying case with storage cutouts.
Reviews
There are no reviews yet.