Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
The SRAM Code R is an impeccable combination of power, modulation and consistency introduced in the SRAM Guide brake series, which was developed for trail and enduro applications, has made converts of some of the world’s best downhill racers. But there is an increasing need for more power and more control, as the definition of “possible” continues to change. The all-new Code brake is purpose built for high-performance, heavy-duty applications. Based on Guide architecture, Code’s fluid reservoir and pistons are bigger. The Code is designed to deliver massive power, predictable modulation and incredible heat management for braking control on the longest descents and under the burliest loads.
The Code R features reach adjustment.
*May not come in standard consumer packaging*
Send Enquiry for Shimano XTR Trail BL-M9120 Brake Lever Right
The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots and the sketchiest of landings. The prototype proved to be World Championship material and the final product is now available for you to shred as hard as you want. Available as a classic 26″, a 27.5″ and as a 29″ wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed
MATERIAL – ALUMINIUM
INNER WIDTH – 30 mm
OUTER WIDTH – 35 mm
DECAL TYPE – Vinyl
BRAKE INTERFACE – Disc
NUMBER OF HOLES – 32
BORE TYPE – Eyelet
RECOMMENDED SYSTEM WEIGHT MAX. – 140 kg
ASTM CLASSIFICATION – 5
Send Enquiry for Rim DT Swiss FR560 29” 32H
SM-CRM95
XTR – Chainring – DYNAMIC CHAIN ENGAGEMENT+ – 12-speed
XTR SM-CRM95 race performance chainring delivers smooth and responsive pedaling over bumpy terrain. The SM-CRM95 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention.
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths – 35mm, 42.5mm and 50mm
- Available in both 31.8mm and 35mm Clamp
- Weight; 35mm 138g, 42.5mm 152g , 50mm 160g
- 9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie Pink
The GX Eagle Transmission (T-Type) chain is the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top. In addition to this shape maximizing shifting performance and upgrading the aesthetics of any bike, it is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength.
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
Send Enquiry for OneUp Components Pedal Rebuild Kit Aluminium
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
SHIMANO DEORE – 12-speed – HG – MTB Chain
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
- Proprietary design ensures smooth shifting and strength
- Extended inner plate improves chain engagement and retention
- Shorter shift times and less pedaling shock
- Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
Saddle Up
Send Enquiry for Dropper Post RACEFACE Turbine R 31.6x200mm ’21
• Mount: 74mm
• Fit: post mount 40mm
• For use with Sram disc brakes with Post-style tabs
• Forged alloy construction
• Includes 2 bolts to attach adapter to the fork/frame (bolts to fix calliper onto adapter not included)