Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
- 160Wh capacity delivers up to one additional hour of riding.
- Compatible with Turbo SL Bikes.
- Includes a 3 LED charge-level indicator.
- SL Range Extender cable sold separately
Specialized Range Extender Cable 160mm (MTB) – For Levo and Levo Sl
Specialized Range Extender Cable 285mm (MTB) – For Kenevo Sl
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
Send Enquiry for Shimano XTR Trail BL-M9120 Brake Lever Right
ALL-MOUNTAIN MASHER
Lyrik instills the confidence you know you’ll need when charging techy lines and mach-speed steeps. A homage to everything we love most about riding—the orchestration of navigating unpredictable terrain and the controlled chaos that makes dream lines possible.
Send Enquiry for Fork Rockshox Lyrik Ultimate Shiny Black | 27.5″ | 160mm | Charger 2.1 | 15x110mm | 37mm Offset
Saddle Up
Send Enquiry for Dropper Post RACEFACE Turbine R 31.6x200mm ’21
FEATURES
– Aluminium trigger designed for a positive lever feel.
– Includes bar clamp
– MatchMaker™X compatible.
– Master GX Eagle™ master colorway to match all cassette and chain colors as part of Eagle™ Colorsystem.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
Send Enquiry for OneUp Components Pedal Rebuild Kit Aluminium
The HG701-11 chain is directional and features SIL-TEC treatment on the roller link plate and pin link plate for increased durability. It is compatible with 11-speed road, MTB, and E-BIKES thanks to its reinforced design.
- Smooth and reliable shifting performance
- Directional 11-speed chain
- More efficient and silent, less maintenance
- SIL-TEC surface treatment
- MTB, Road, E-BIKE 11-speed compatible
- Reinforced chain for E-BIKE use
- New chain plate dimension
- Weight: 257g (114Links)
UNION – ENDURO WHEELSET
The Union is a do-it-all wheel designed to shred anything that’s thrown at it.
We took a three pronged approach to the creation of the Union- create a rim that’s lightweight, has low radial stiffness and has extremely high impact resistance. Combining these three points with our unique layup design, we were able to achieve a truly impressive “quiver killing” rim. The Union’s design makes it the perfect choice to race enduro at high levels, shred the local trails on an afternoon ride or smash a solid day of shuttle laps.
Send Enquiry for Wheelset We Are One Union/Hydra BOOST 29″ / 27″ MULLET Black 6-Bolt Sram XD
• Mount: 74mm
• Fit: post mount 40mm
• For use with Sram disc brakes with Post-style tabs
• Forged alloy construction
• Includes 2 bolts to attach adapter to the fork/frame (bolts to fix calliper onto adapter not included)
F20 Flat Pedal Tech Specs >
- Replaceable Hollow pins offer amazing grip
- Axle is high strength Cr-Mo, heat treated and plated
- Pedal platform is CNC machined with a slight concave for stability
- Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
- Available in: black
- Weight: 390g per pair