Product Description
$139.00
CushCore PRO fits tire widths 2.1″ to 2.6″ and inner rim widths 22mm to 35mm.
Includes (1) CushCore tire insert, (1) 44mm CushCore green presta air valve, (2) rim stickers
Be the first to review “CushCore PRO Tyre Insert 27.5 x 2.1 – 2.6″ Single”
Related Products
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Next generation tubeless tyre design incorporating tubeless specific bead and casings, allowing for easy installation and superior air retention. Utilising an EN casing paired with the R/T rubber compound, the Newton-ST EN is lightweight with sturdy tread blocks.
- Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability.
- Bead: Foldable
- Butyl wrapped bead = 2Bliss Ready
- Compound: GRIPTON® T9
- 650 x 2.6″, psi 25-40, approximate weight 960g
- 29 x 2.3″, psi 25-50, approximate weight 975g
- 29 x 2.6″, psi 20-40, approximate weight 1050g
HANS DAMPF
29″ x 2.35″ | EVO | Super Trail | TLE | ADDIX Soft
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
The standard by which all tyres are judged.
- Ramped, directional tread design
- Large cornering blocks
- Single-ply, DoubleDown, and DH casings available
- 3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
- Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
Size | ETRTO | Tech | Weight (g) | PSI | Type |
29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes – aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.
- Dual compound or 3C MaxxTerra options
- EXO sidewall protection
- Tubeless Ready (TR)
Category: XC Race, XC, Trail
Recommended use: Loose to wet spring/fall trail conditions
Recommended installation: Front or Rear
Drive focused tread delivers speed and durability with tracking performance. Rear specific
CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts.
Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms.
Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns. Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Reviews
There are no reviews yet.