$229.90
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
Description
• Weight: 379g (Steel Axle)
• Platform material: 7075 Alloy
• Profile: 15mm
• Platform: 100mm x 102mm
• Dish: 2mm (concave)
• Pin material: Stainless steel
• Pin width: 3.5mm
• Pin height: 4.5mm
• Axle Material: EN24T Steel
• Internals: 2 x Igus W300 bushes, single sealed bearing and inboard rubber oil seal
• Colours available: Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold, Toxic Barbie Pink
Additional information
Colour | Bullion Gold, Deep Blue, Iron Bro Orange, Kash Bronze, Purple Rain, Race Red, Rhodium Silver, Toxic Barbie Pink, Black |
---|---|
Brand | Burgtec |
Related Products
- Backwards compatible, works with both 10-50t and new 10-52t cassettes.
- Updated cage architecture provides better chain retention and precise shifts.
- Comes in GX Eagle™ master colorway as part of Eagle™ Colorsystem and goes with all colors of Eagle cassettes & chains – from Black to Gold to Rainbow, to HardChrome and new Copper.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
Send Enquiry for OneUp Components Pedal Rebuild Kit Aluminium
Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required.
The E-MTB saddle for women
- Made for E-MTB
- Painless biking
- By women – for women
E-mountain bikers have the ability to stay seated throughout steeper and rougher terrain, therefore their saddle demands are slightly different. For this reason Ergon has developed a special men’s saddle for E-MTBs.
Send Enquiry for Saddle Ergon SM E-Mountain Sport Women Medium/Large BLACK
- Our best aluminium crankset.
- Direct mount interface compatible with chainrings across the entire Eagle™ Ecosystem.
- Master GX colorway as part of Eagle™ Colorsystem – pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper.
UNION – ENDURO WHEELSET
The Union is a do-it-all wheel designed to shred anything that’s thrown at it.
We took a three pronged approach to the creation of the Union- create a rim that’s lightweight, has low radial stiffness and has extremely high impact resistance. Combining these three points with our unique layup design, we were able to achieve a truly impressive “quiver killing” rim. The Union’s design makes it the perfect choice to race enduro at high levels, shred the local trails on an afternoon ride or smash a solid day of shuttle laps.
Send Enquiry for Wheelset We Are One Union/Hydra BOOST 29″ / 27″ MULLET Black 6-Bolt Sram XD
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots and the sketchiest of landings. The prototype proved to be World Championship material and the final product is now available for you to shred as hard as you want. Available as a classic 26″, a 27.5″ and as a 29″ wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed
MATERIAL – ALUMINIUM
INNER WIDTH – 30 mm
OUTER WIDTH – 35 mm
DECAL TYPE – Vinyl
BRAKE INTERFACE – Disc
NUMBER OF HOLES – 32
BORE TYPE – Eyelet
RECOMMENDED SYSTEM WEIGHT MAX. – 140 kg
ASTM CLASSIFICATION – 5
Send Enquiry for Rim DT Swiss FR560 29” 32H
SM-CRM95
XTR – Chainring – DYNAMIC CHAIN ENGAGEMENT+ – 12-speed
XTR SM-CRM95 race performance chainring delivers smooth and responsive pedaling over bumpy terrain. The SM-CRM95 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention.
F20 Flat Pedal Tech Specs >
- Replaceable Hollow pins offer amazing grip
- Axle is high strength Cr-Mo, heat treated and plated
- Pedal platform is CNC machined with a slight concave for stability
- Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
- Available in: black
- Weight: 390g per pair