Product Description
Yeti 2020 Overlook Hoodie Charcoal
$89.00
Soft, relaxed hoodie for off the bike style and comfort
An ode to our backyard and essential for post-ride drinks, this classic pullover hoodie has you covered.
Features
55% cotton – 45% polyester
Soft, midweight fleece for a comfortable fit
Additional information
| Size | Large, Medium, Small, X-Large |
|---|
Related Products
Soft and Ventilated Knee Guard
Our soft-shell 3DF impact foam knee pads just keep getting better and better.
Now with a totally new and refined sleeve construction and packed with our latest material tech.
We know ventilation, fit and anti-slip is key for you, and great protection is a given. Therefore the new 2019 3DF 5.0 is at its best right now!
CE tested and certified protection that scores a total of 13 points in the Leatt protection rating system.
$149.00
Born from the mountains of Colorado, the Mountain Patch Tucker Hat keeps you grounded in your singletrack, dirt baggin roots, even if your making a run to the big city. Curved bill keeps the sun at bay and the mesh back panels ensure maximum ventilation. The adjustable snapback gives you that perfect custom fit.\
Features:
Curved bill
Adjustable snapback
Mesh trucker style back for maximum ventilation
New mountain patch Yeti logo
$39.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
Check fork compatibility.
KIT INCLUDES
$40.00
- EDC TOP CAP
- EDC steerer plug
- 2x 1mm, 3mm, & 5mm Headset Spacers
With all the same great features as the original Travel Bag, the Pro model saves extra weight for riders who push their airline's weight limits.
Capable of carrying everything from road bikes to DH rigs, the Bike Travel Bag Pro was specifically designed to protect your ride from the dangers of travel. Watching your bike disappear behind the check-in counter used to be terrifying! However, this bag will put all your fears to rest. This bag features two-wheel pockets with reinforced rotor panels to prevent bent rotors and to protect your frame from impact. The bag will keep your frame secure with straps and requires minimal disassembly, you just need to remove your handlebar and pedals. When we travel, we trust Evoc with our bikes!
New For 2019 Models:
The Pro Bag has seen some great updates for 2019. It's now 6cm longer, making it better suited to 29ers, the wheel compartments have been enlarged to accommodate up to 2.6" tyres, the clip on wheel has been redesigned and beefed up with a larger fixing pin, and the bags now come with the integrated aluminium bike stand included. This makes packing your bike much less of a hassle and you'll no longer need the road bike adaptor to transport your skinny wheeled steed.
Features:
- 8.0kg.
- 136 x 39 x 80 cm (outside dimensions)
- 130 x 27 x 80 cm (inside dimensions)
- 124cm max wheelbase.
- Suitable for road, XC, Trail, Enduro and DH bikes. 29" wheel compatible
- Not compatible with fat bikes.
- Foldable when not in use.
- 10.0kg (including clip-on wheel and bike stand)
- 147 x 36 x 85 cm (outside dimensions)
- 136 x 27 x 80 cm (inside dimensions)
- 130cm max wheelbase
- Includes bike stand, clip-on wheel, and frame pad
- Suitable for road, XC, Trail, Enduro and DH bikes
- Max tyre width 2.6" (29" wheel compatible)
- Not compatible with fat bikes
- Foldable when not in use
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. Available in left- or right-side configurations. Sold individually or in pairs.
$18.00
ULTRA-SLIM, SOFT AIRFLEX ELBOW GUARD
Minimalistic, comfortable fit and provides CE certified impact protection - all our design criteria accomplished!
By changing over to a 3D-shaped impact gel, we’ve achieved the minimalistic slim shape which does not restrict movement whilst keeping the CE Impact protection.
The lightweight construction, single sizing and silicone grip panels give you the famous Leatt non-slip fit. Once you put these on, you will understand what we mean.
The Airflex Elbow Guard scores a total of 11 points in the Leatt protection rating system.
$129.00
The Burgtec BMG Mudguard is a simple solution to keep the spray down when the weather is against you.
Just simply attach the guard with zip ties to the underside of your fork bridge and fork legs and you’re ready to go.
Fits the majority of suspension forks and rigid forks
Lightweight mudguard
Weight 20g
$19.00
This is the FOX Digital High Pressure Pump. Gives you the ability to fine tune the air pressure in your Fox suspension easily and accurately. The large digital display reads pressures up to 300 psi.
The main features include
- 0.5psi increments below 100 psi and 1 psi increments above 100 psi
- Ability to read 0-300 psi
- Units can be displayed in psi, bar and kg/cm2
- Automatic shut off
- Pressure release button to allow air to be removed while getting to the right psi
- Swivel rotating hose with an extended Schrader valve tip
- Replaceable battery
For many years the BIKE TRAVEL BAG is our approved solution for transporting almost any type of bike. As a hybrid construction it combines the advantages of a hard shell case with the properties of a soft bag.
SPECIFICATIONS
285 l, 9100 g, 138 x 39 x 85 cm (Inside 130 x 27 x 80 cm) Collapsible to: 136 x 39 x 25 cm Maximum wheel base: 126 cm- Fits most: Cross Country-, All Mountain-, Enduro-, Freeride-, Downhill-Bikes up to 29“, Gravel-, Road-, and Triathlon-Bikes
- New polycarbonate bike block for fixation included
- For safe transport of road bikes and triathlon bikes, you need the ROAD BIKE ADAPTER DISC,ROAD BIKE ALUMINIUM STAND or BIKE STAND
Lightweight, shop quality shock pump. Full CNC-machined aluminum construction. Maximum quality and durability. Ergonomic handle enhances pumping comfort. Diaphragm gauge offers excellent accuracy; max. 400 psi (27.5 bar). Tough composite matrix case houses gauge and improves grip. Zero-loss chuck design unthreads from the shock after valve pin seals.
SPECS
MAX:
400psi | 27.5bar
LENGTH:
258mm
The included 9 function Multi Tool contains your most used tools and
is designed to live inside your stem/steerer tube.
Never get stuck without a Multi Tool on a ride ever again.
$63.00
⬢ 2, 2.5, 3, 4, 5, 6, 8mm
⁕ T25 Torx
▬ Flat Head Screwdriver
- Light weight (Adds just 75g to your bike)
- VERY easy to install in less than 5 mins.
- Available in 6 colours (Black, Red, Blue, Green, Orange, Purple, Turq)
- No need to remove your star nut or thread your steerer tube.
- Colour matched to our Composite Pedals, Grips and Handlebar Decals.
- Run a single Multi Tool on all your bikes (extra carriers are $15 each)
- Fox except Fox 38 = 190mm (7.5") min
- Fox 38 = 210mm (8.25") min
- RockShox Forks = 210mm (8.25") min
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
PUMP VOLUME
A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.
FAST-ON HEAD
Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.
EDC PUMP SPEC
$94.00
- 2 Sizes: High Volume 100cc & Compact 70cc
- 1-1/4" dia x 7" for 70cc (32mm dia x 178mm)
- 1-1/4" dia x 10" for 100cc (32mm dia x 254mm)
- 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
- 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2
- Fast-On Head (Presta Only) - No threads or locking levers
- Integrated CO2 Inflator
- Fully Sealed, Weatherproofed Internals
- Includes Bottle Cage Mount
- thread CO2 cartridge fully onto inflator head
- press inflator head onto presta valve
- to inflate back off CO2 cartridge a half turn
- tighten CO2 cartridge to stop inflation