Wheelset MS – Hope Fortus 30 29″ – PRO4 HUBS [15 x 110mm front and 12 x 148mm rear] – BLACK

Chris King ISO hubset Chris King ISO hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.

DT Swiss EX511 rim Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB was all about since the beginning. The EX 511 rim is the perfect tool for this quest: It comes with all the technology that has delivered many EWS wins and packs it in a 30 mm wide profile. Ready to go burlier, faster. DT Swiss XM481 rim Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30 mm of inner width together with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain. We Are One Composites Not all Carbon rims are created equally. Here at We Are One we are the first manufacturer to bring transparency to the process and products. Our unmatched quality and precision tolerances allow us to make the best carbon rims on the market. Period! Our unique layup process, developed here in-house, allows for precise fiber placement, giving no fiber drift or bridging during layup. This process ensures that all our fiber strands are under correct elongation and are carrying the loads they should. All of our rims are perfect out of the mold. We do not sand, fill, paint, or doctor any of our products. Each rim is assigned a unique serial number that is tracked and assembled by one of our layup staff. Our team takes great care and pride and only produce the best rim possible. ZIPP 3ZERO MOTO rim Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology™, allows the rims to “pivot” from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed:

• Higher impact resistance
• Reduced chance of pinch flatting
• More traction in rough corners
• Smoother ride in rocky terrain
• Ability to run lower tire pressure
• Reduced rider fatigue

*Our wheels come with tubeless rim tape and valves installed. They are built using DT Swiss Competition spokes, and DT Swiss Brass Pro-Lock nipples.