IN A LIGHTWEIGHT PACKAGE
Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity.
|SIZES (3-position Lever)||
SPECS & FAMILY FEATURES
|Metric||210×50, 210×55, 230×60||ALL-NEW chassis and damper|
|ADJUSTMENTS||High-flow main piston|
|Independent 2 Position Open/Firm Lever||Air seal package|
|Low Speed Rebound – 16 Clicks||Volume spacers with smaller increments|
|Low Speed Compression – 11 Clicks||MCU bottom out bumper|
|ALL FACTORY FLOAT X SHOCKS||Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster|
|Body finish||Kashima Coat||Independent firm mode circuit – Clockable 2 position adjuster|
|Air sleeve finish||Kashima Coat||Increased rebound adjuster range (over DPX2)|
|Optimized reservoir lengths per shock size|
|Hydraulic top out feature|
|Reduced damper noise|
|Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2|
|Bearing hardware compatible both sides|
|Air valve location offers improved frame fitment and pump access|
210×50, 210×55, 230×60
A full bred enduro race saddle!The new saddle for performance oriented enduro and gravity riders was developed and race tested in the Enduro World Series. The SM Enduro Men has a V-shape and a flat top, providing maximum freedom of movement in technical terrain. It also comes with a male specific relief zone. In order to ensure even better bike control with your legs all contouring edges are comfortably padded.
Shimano’s XT/Saint RT86 Ice-Tech 6-Bolt Disc Brake Rotor provides exceptional stopping performance in all weather conditions. Featuring a triple-decker construction of stainless steel and alloy 3-layer to speedily disperse the heat generated from your ride, this mountain bike disc brake rotor has an outstanding lifespan and produces less noise than your average, run-of-the-mill disc rotor.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry!
- 60 Grams
- Standard Grip Length – 5 1/8″
- Weight plus or minus 5%
- 1 Set of Bar Plugs Included
* Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar.
It’s the little difference’s that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw.
Occupying a new realm in shifting performance, the redesigned XX1 Eagle™ derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1™ shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle™ ecosystem, the XX1 Eagle™ rear derailleur makes full use of the new 10-52t cassettes and is backwards compatible to also work with the 10-50t.
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths – 35mm, 42.5mm and 50mm
- Available in both 31.8mm and 35mm Clamp
- Weight; 35mm 138g, 42.5mm 152g , 50mm 160g
- 9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie Pink