Be the first to review “FORK FOX 34 FLOAT FACTORY STEPCAST | 29″ | 120mm | GRIP SL |KABOLT SL | 44mm | 2025”
You must be logged in to post a review.
Related Products
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring.
All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with.
$229.00
2025 Fox Shox 40 Float 29 GRIP X2 Factory Downhill Fork
Target locked on the top step of the podium and developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. The GRIP X2 damper now offers more tunability and traction than ever before, ensuring the 40 stays planted in the hot seat.
Features:
- Upper Tube Finish: Kashima Coat
- Air Channels Bleeders
- Floating Axle: 20TA x 110
- Rotor Size: 203 direct Post Mount, Up to 230 compatible
- Mud Guard Mount
- Air Spring: FLOAT EVOL
- Steerer: 1.125 Straight
- Starting Weight: 2745g
- Rake: 52mm
- Travel: 203mm
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
$399.00
Add to cart
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
• Fox Float CTD/DPS Air Spring Volume Tuning Kit • Fox Par Number: 803-01-250
RockShox SID SL Ultimate Charger Race Day Debon Air Remote 29″ Suspension Fork – 100mm – 44mm Offset – Tapered – 15x110mm Boost – gloss black
SID SL Ultimate for CrossCountry
When you ride the SID SL Ultimate, you realize that RockShox considered every detail. A stable chassis and the lightest Charger Race Day shock are a perfect pairing. Perfectly tuned for the pace needs of cross-country.
The DebonAir air spring is specifically tuned for XC needs, letting the fork maintain a higher ride height for increased confidence and control on the trail. Extremely low-friction SKF seals provide long fork performance and great responsiveness, and Maxima-Plush damping fluid reduces friction and noise.
Features of the SID SL Ultimate 29″ suspension fork
- 32mm chassis – the perfect blend of light weight and stiffness for modern XC bikes
- Machined and anodized crown
- DebonAir air spring maintains a higher ride height for increased confidence and control
- SKF ultra-low friction seals provide long-lasting fork performance and improve suspension feel
- Proven Charger Race Day shock offers consistent performance and rock-solid lockout
- Maxima Plush damping fluid reduces friction and dampens noise
- Includes fender, OneLoc Remote and Maxle Stealth axle
- 29″ wheel option only
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
$29.00
Add to cart
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.
$299.00
For 1/2" shafts. Change the amount of mid stroke and bottom out resistance by changing the volume spacers in the shock. Individual air spring curve adjustment of 2018s Float DPX2 and Float X (pre 2015) rear shocks from 2016 on. Set of 5 spacers.
$38.00
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
In it to win it? Super Deluxe Ultimate is the smart bet for the podium. Packed to the hilt with fine-tuning adjustments that meaningfully improve suspension performance, it’s the most advanced shock we’ve ever made. Pioneering one of the most impactful innovations in damper history, the new RC2T damper allows for 100% independent High Speed and Low Speed Compression adjustments. The arsenal of elite technology rounding out Super Deluxe Ultimate is grounded in the philosophy that, at the highest level of capability, the extra ounce of performance and customization is what it takes to capture the crown.
Please check with frame manufacturer on Aftermarket rear shock compatibility.
THE NEW FLOAT X2 CHANGES EVERYTHING
The award-winning, gravity-defying air shock is totally redesigned for 2021. Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house.| SIZES (With 2-position Adjust Lever) | |
|---|---|
| Imperial Sizes (NEW 2021 model) | |
| Metric Sizes (NEW 2021 model) | |
| Imperial Sizes (2020 model) | 7.875 x 2.25 |
| SIZES (Without 2-position Adjust Lever) | |
|---|---|
| Imperial Sizes (NEW 2021 model) | |
| Metric Sizes (NEW 2021 model) | 250 x 75 |
| Imperial Sizes (2020 model) | 8.75 x 2.75 |
| ADJUSTMENTS |
|---|
| Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) |
| High-speed compression - 8 clicks |
| Low-speed compression - 16 clicks |
| High-speed rebound (w/VVC) - 8 clicks |
| Low-speed rebound - 16 clicks |
| ALL FACTORY FLOAT X2 SHOCKS | |
|---|---|
| Body finish | Kashima Coat |
| VVC Rebound | Yes |
Reviews
There are no reviews yet.