Product Description
$289.00
- Durable alloy body
- Durable cast steel wings
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- Hex alloy endcap and bashguard
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Only 2 left in stock
Description
| body material | 6061-T6 aluminum |
| cleats | Premium brass cleats with shims included |
| endcap | Hex alloy |
| inner bearing type | Igus LL-glide bearing |
| max rider weight | No restriction |
| outer bearing type | Enduro MAX cartridge bearing |
| q-factor | 52mm |
| release angle | 15° / 20° |
| spindle material | Forged scm 435 chromoly steel |
| spring material | 300 series stainless steel |
| warranty | 5 years |
| weight | 320g per pair |
| wing material | 17-4PH stainless |
Additional information
| Brand | CrankBrothers |
|---|
Be the first to review “Crank Brothers Candy 7 Black”
Related Products
Our most versatile pedal - the candy excels at it all.
- Durable alloy body
- Stamped steel wings
- Snap-on traction pad technology to customize and optimize the shoe/pedal interface (available separately)
- Ribbed body for better traction when unclipped
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Owners Manual and Technical Documents here
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
MTBR 5 Star Review – Read the full review here
“The pedals performed flawlessly and just seemed to get better with time as they spun more freely and the edges were smoothed out. The best thing about them is the grip. Heel down, heel up or pedaling out of saddle, the pedals always provided reliable and predictable grip.”
“Are they better than the venerable Race Face Chester pedals at $55? Yes! They weigh exactly the same at 360 grams but the OneUps deliver much more grip.
Our new cleats provide the optimal experience for every rider. Choose from Easy Release cleats that make it easier to unclip, or Standard Release cleats optimized for intermediate to advanced riders. Both are available in options with or without float.
Understanding Cleat Terminology:
Mallet DH
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
The Penthouse Flat Mk4 is more than a pedal it’s a religion.
The Mk4 pedal keeps the best features of the Mk3 such as oversized platform, incredible grip and easy to remove pins.
We then put it on a diet and slimmed down the weight and the profile of the body.
We also increased the reliability of the internals of the pedal by using a double bush single bearing arrangement. Producing longer intervals between servicing.
Singletrack Magazine long term test – Burgtec Penthouse Mk4s are seemingly pedals that do not die, they just become more storied
Specification
– Weight: Steel axle 440g
– 16mm profile
– 1mm dish
– Easy to remove pins
– Steel pins
– New double bush single bearing internals.
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
F20 Flat Pedal Tech Specs >
- Replaceable Hollow pins offer amazing grip
- Axle is high strength Cr-Mo, heat treated and plated
- Pedal platform is CNC machined with a slight concave for stability
- Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
- Available in: black
- Weight: 390g per pair
Mallet E
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 52mm q-factor for maneuverability on tight trails
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Shimano XTR is well known for its quality and the Shimano XTR Trail PD-M9120 SPD Pedals are XTR through and through. Aimed directly at All Mountain and Enduro riders these pedals will tick most boxes for riders who are after a top quality pedal with a wide and long contact area that provides a more solid pedal to shoe interface which transmits power efficiently. Whilst these are best paired with Shimano’s range of ME and AM shoes they are just at home in a wide range of MTB SPD shoes.
The binding platform is protected with a durable and lightweight integrated cage that surrounds the binding and makes it easier for stepping into as it acts like a guide.
The new axle design is more durable than ever before and weighing in at 405g a pair these will offer you better bike control whilst giving you the durability and logivity that an XTR product will provide.
Specs:
- MODELPD-M9120 – XTR M9100 Series
- Colour – Black
- Weight -405g a pair
- Dual Sided Binding
- SM-SH51 Cleats included
- Reflector SM-PD60
- Sealed mechanism
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
F20 Flat Pedal Tech Specs >
- Replaceable Hollow pins offer amazing grip
- Axle is high strength Cr-Mo, heat treated and plated
- Pedal platform is CNC machined with a slight concave for stability
- Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
- Available in: black
- Weight: 390g per pair
Aggressive Downhill Riding SPD Pedals Saint-level SPD pedal, the perfect reliable choice for aggressive downhill/enduro riders. This pedal is super thin for an SPD while still offering a larger contact area just in case. The PD-M821 has improved axle durability over the PD-M820’s, and better bike control when paired with the Shimano GR series shoes.
The Shimano XT Trail pedals are built for Enduro and Trail riders wanting to get the best out of their bike. With a wider and longer platform they offer improved control, making it easier to navigate obstacles on the trail. The integrated cage helps protect the binding system from impacts on rocks or roots and makes stepping in to Shimanos crisp SPD system even easier. The more durable axle provides increased longevity against rock strikes.
In Mountain bike riding, trail conditions change drastically from one second to the next, from one turn to the next. Mountain bikers need to be able to seamlessly Perceive the conditions, Judge their options, and Operate their bike in a split second. XTR satisfies the needs of the most demanding riders by providing the highest level of precision and integration. We refocused on the original goal of XTR – to be the ultimate race components.
Greater flexibility and action-optimized cockpit layout to focus riding by I-SPEC EV
Quicker lever access and light operation force by new shifting system for rider’s concentration
Definitive HYPERGLIDE+ shifting let you pedal continuously while shifting
High-performance and optimal disc brake system for XC and Enduro racing
Reviews
There are no reviews yet.