Showing 1–24 of 59 results
$8,290.00
Add to cart
CUSTOM BUILD!
Handbuilt DT to Chris King wheelset, Fox 36 Factory, X01 Groupset and CODE RSC brakes!
$59.95
Add to cart
Fox Racing Fork Dust Wiper/Foam ring Kit – Latest version, Low Friction, 36mm with NO flange. Part number 803-00-933
Suitable for all Fox 36 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note – These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers (Including 1 for Talas cartridges)
$85.00
Add to cart
The Youth Launch D3O Elbow guards offer an excellent combination of impact absorbing protection with a value focused build for smaller riders. The CE certified D3O insert works seamlessly with the slip on design of the guard to provide all day comfort and the confidence to try new trails.
$999.00
THE UNDISPUTED ALL-MOUNTAIN CHAMPION.
Add to cart
THE UNDISPUTED ALL-MOUNTAIN CHAMPION.
NOW EMTB READY.
The award winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing.
$1,330.00
Add to cart
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
$1,530.00
Add to cart
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
| Chassis | Standard |
| Wheel Size | 29 |
| Series | Factory |
| Damper | GRIP2 |
| Damper Controls | HSC – LSC – HSR – LSR |
| Axle | Kabolt-X 110 |
| Steerer | 1.5 Tapered |
$1,599.00
THE HARD HITTING
Add to cart
THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
$999.00
Add to cart
THE HARD CHARGING DO IT ALL TRAIL FORK
Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own.
$1,330.00
Add to cart
Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own.
SPECS:
- ALL-NEW chassis
- NEW air/oil channels
- NEW arch shape offers improved head tube clearance with shorter rakes
- NEW 58mm diameter crown
- Updated EVOL air spring
- Damper option(s): GRIP2
- Travel: 140mm
- Wheel size(s): 29″
- Offset: 44mm
- Axle(s): 15×110 QR and 15×110 Kabolt
- Genuine Kashima Coat
- Starting weight: 1698 g
$699.00
Add to cart
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Volume spacers and star nuts not included
$999.00
Add to cart
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.
Your FOX 36 Fork:
| Rake | 44mm/51mm |
| Chassis | Standard |
| Wheel Size | 29 |
| Series | Factory |
| Damper | FIT4 |
| Damper Controls | 3 Position – Adjust |
| Color | Shiny Black |
| Axle | 15QRx110 |
| Steerer | 1.5 Tapered |
$899.00
Add to cart
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
$1,330.00
Add to cart
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
$1,330.00
Add to cart
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit.
$899.00
Add to cart
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Volume spacers and star nuts not included
$1,330.00
38 The Hard Hitting Long-Travel Enduro Specialist
When you are going large you need the 38. Designed to work best with 160-180mm of travel the 38 has all the revolutionary features of the 36. The Fox 38 range sets new standards for confidence, performance and durability.
Float Evol Air Spring
Evol technology increases negative air spring volume, optimizing small bump sensitivity. Evol’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of Evol are further enhanced by Fox’s new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the Evol air spring to operate freely without unintended interference.
Grip 2 Damper
Fox’s Grip 2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. Grip 2 includes Fox’s patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. Grip 2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork.
Factory Series
Feature-packed and designed to exceed the demands of factory-level riders. Factory Series products feature slippery smooth, ultra-durable genuine Kashima coat. Factory forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.
Add to cart - Wheel Size: 29″
- Travel: 170mm
- Rake: 44mm
- Axle: Kabolt-X 110mm
- Upper Tube Finish: Kashima Coat
- Rotor Size: 180mm Direct Post Mount (Up to 230mm compatible)
- Air Spring: Float Evol
- Steerer: 1.5 Taper
- Damper: Grip 2
- Damper Controls:HSC, LSC, HSR, LSR
$1,330.00
Add to cart
With the new 36, Fox wanted to increase the smoothness, stiffness and tune-ability of their market leading fork. On the smoothness front, and all new chassis has three key features. The new floating axle design allows for precise alignment of the hub and the upper and lower fork legs, ensuring the smoothest tracking of terrain. New channels in the back of the lower legs increase the air volume in the lowers to reduce the amount of unintended pressure ramping, as well as allow more oil flow to the dust wiper foam rings and bushings. Finally the bleed valves here allow for atmospheric pressure equalisation and release of pressure build up from long, rough runs, improving small bump sensitivity and responsiveness.
Specifications:
- Spring: EVOL air spring.
- Dampers: GRIP 2 with VVC, external HSC / LSC and HSR / LSR.
- Lowers: Kabolt-X 110 (axle included)
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
$699.00
The Fox 36 Factory GRIP2 is FOX's top fork for trail, all-mountain and light enduro use and now comes with new Grip2 shock and EVOL technology for even better responsiveness. Stiff 36 mm anodized standpipes, exclusive SKF seals and the closed cartridge ensure a long service life. The different tuning options of the Grip2 damping ensure best performance in the field. Ground contact is almost always given with her. Even in difficult passages, the fork works reliably and you do not lose control of your bike.
- Model - Fox 36 Factory GRIP2 2019 27.5 "170mm 44mm offset suspension fork
- FLOAT EVOL air spring provides extra-rich suspension
- Grip2 shock for improved control
- Factory Series models with Kashima Coat coating
details:
- Application: Trail, All Mountain, Enduro
- Wheel size: 27.5 "| 650B
- Material fork crown / shaft: aluminum / aluminum
- Material stanchions: Kashima, coating gold
- Material dip tubes: aluminum
- Axle standard: 15x110 mm BOOST thru axle
- Steerer: 1.5 "to 1 1/8" tapered
- Travel: 170 mm
- Spring system: Float air
- Damping: Grip2, closed cartridge
- Lockout: without
- Installation height: 559.1 mm
- Brake pickup: Postmount
- Max. permissible brake disc size: 210 mm
- tire diameter max .: 27.5 "
- Tire width max .: 2.5 ", width in the fork bridge: approx. 90mm
- Offset: 44 mm
- Weight according to manufacturer: 1956 g
Add to cart 
$999.00
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
Add to cart
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
$1,530.00
THE HARD HITTING
Add to cart
THE HARD HITTING
LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
$399.00
Already a favourite of riders all over the world due to its fantastic performance, hassle-free design, and straight up good looks, The Fox Transfer seatpost has been made even better for 2021. Fox has completely redesigned the Transfer to improve the serviceability, reduce the weight, and it’s been given a nip and tuck to reduce the overall length and the minimum insertion depth so it’s possible to run more drop on a larger number of bikes. The new Transfer is also 25g lighter than the 2020 model and the new clamp design reduces the stack height of the post. The Factory version of this post gets a good coat of Kashima on the stanchion for extra buttery smoothness and an even greater bling factor.
Select options
Already a favourite of riders all over the world due to its fantastic performance, hassle-free design, and straight up good looks, The Fox Transfer seatpost has been made even better for 2021. Fox has completely redesigned the Transfer to improve the serviceability, reduce the weight, and it’s been given a nip and tuck to reduce the overall length and the minimum insertion depth so it’s possible to run more drop on a larger number of bikes. The new Transfer is also 25g lighter than the 2020 model and the new clamp design reduces the stack height of the post. The Factory version of this post gets a good coat of Kashima on the stanchion for extra buttery smoothness and an even greater bling factor.
$229.95
Maximum coverage open face mountain bike helmet The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system...
Add to cart 
$40.00
Add to cart
Engineered with “Kashima-phillic” tackifiers to increase the bonding of oil to stanchion, mineral oil and molybdenum additives make the ultra-slippery Gold formula oil an important component to the Fox recipe for plushness.
- Use 20wt. Gold Bath Oil with FIT and O/C damper cartridges but should NEVER be used in open bath fork dampers. (For Open Bath Dampers – Use Fox Red 10wt Fluid)
- Gold is compatible with all 34mm, 36mm, and 40mm FOX Low-Friction wipers
- FOX 20wt Gold is only compatible with the latest version of the 32mm FOX Low-Friction wipers 803-00-878 or the new flangeless 803-00-944.The label indicates specifically that these wipers are compatible with 20wt. Gold.
$45.00
Add to cart
The Fox suspension fluid Gold 5WT protects the fork effectively against wearing. It maintains seals, reduces frothing and provides optimal damping characteristics over a wide temperature range.